LTMG 2.5 ton 2500kg small backhoe loader 4x4 mini loader backhoe with 1 / 0.3m3 bucket capacity
LTMG 2.5 ton 2500kg small backhoe loader 4x4 mini loader backhoe with 1 / 0.3m3 bucket capacity

LTMG 2.5 ton 2500kg small backhoe loader 4x4 mini loader backhoe with 1 / 0.3m3 bucket capacity

1. Weichai DEUTZ wp4g95e221 engine (optional Dongfeng Cummins) is selected as the excavator loader, which has the advantages of low noise, low fuel consumption, large power reserve and low emissions.

2. The excavator loader adopts the transmission system specially produced for the excavator loader by Carraro company of Italy. There are 2-drive and 4-drive models, both with differential lock and wet brake.

3. The dual variable system adopts imported four gear synchronous, electro-hydraulic control forward and backward, and mechanical synchronous gear shift, which is specially equipped for the excavator loader

4. The loader has a hydraulically driven clutch and a clutch release button to enable the machine to shift gears quickly according to road conditions.

5. Electrohydraulic control forward / reverse direction switching, without operating the clutch. Due to the low operating force, the direction change is more stable, the operation cycle is faster, and the production efficiency is higher.

6. Imported drive axle specially equipped for excavator loader, maintenance free wet braking, greatly improving the safety and reliability of driving. With differential lock, the traction performance of the whole vehicle is greatly improved.

7. The open hydraulic system is adopted, which makes the operation more stable, the response more agile, and the excavation control more accurate.

8. The hydraulic system adopts high-efficiency gear single pump system, and the main components pumps, multi-channel valves and steering gear are all products of well-known domestic companies.

9. The front four and rear four gears are adopted, and the maximum forward speed can reach more than 40km / h, which can fully meet your needs. At the same time, the hydraulic hammer control oil circuit is configured for the user, and the user can assemble the hydraulic hammer at any time according to needs. The unique control design makes the control more comfortable and labor-saving.

10. Wet braking is adopted for service braking and parking braking, with good braking effect, convenient parking brake adjustment, original imported components, reliable quality and guaranteed driving safety.

11. Provide users with a spacious and comfortable fully enclosed ROPS cab with all-round vision.

  • Length X Width X Height :

    5910X 2268 X 3760(mm)
  • Wheel base :

    2250(mm)
  • Track :

    1640(mm)
  • Min. ground clearance :

    300(mm)
  • total operating weight :

    7600kg
  • Engine model :

    YUCHAI YC4A105Z-T20
  • rated power :

    75KW(100HP)
  • rated speed :

    2400 r/min
  • Product Detail

BLT388Dimension technological parameters
Overall Dimension
Length X Width X Height   5910X 2268 X 3760(mm)
Wheel base   2250(mm)
Track 1640(mm)
Min. ground clearance    300(mm)
Main Technical Specification
system pressure  
 load hydraulic system 18Mpa
dig hydraulic system 20Mpa
steering hydraulic system  12Mpa
system flow  120L/min
four-wheel drivewhole hydraulic system  
total operating weight 7600kg
maximum speed  22Km/h
maximum gradient capacity 30°
loading bucket capacity  1.0m3
rated loading 2500kg
maximum articulated height of bucket 3400mm
bucket discharge height  2795(mm)
bucket discharge distance 1048(mm)
loading lift capacity   25KN
bucket hydraulic translation function  yes
bucket lift time 6.8s
bucket lower time  2.5s
bucket discharge time 1.2s
maximum tractive force 39KN
maximum breakout force 38KN
backacter bucket capacity 0.1-0.4m3
backacter discharge height   3878(mm)
maximum digging depth  4080~4500(mm)
maximum digging radius 5688(mm)
bucket slewing angle 190°
bucket digging capacity  46KN
bucket stick digging capacity  31KN
Diesel engine
model YUCHAI YC4A105Z-T20
rated power 75KW(100HP) 
rated speed  2400 r/min
cylinder –internal diameter  4-102
maximum torque 400N.M 
minimum fuel consumption  235 g/kw.h
displacement 4.3L
Transmission system
model of hydraulic pump fixed shaft power shift transmission
gear shift 2forward shift 2 reverse shift
 torque  YJ-280
drive pump CDXaf3016-IL
flow   16ml/r
 work pump  CBGj2063
flow 63ml/r
Steering system
 type  articulated hydraulic steering
model of steering control valve   BZZ5-250
model of turning control valve YSF25S-00
steering angle 36±1°left or right 36±1°
minimum turning radius   5018(mm)
Axles
main transmission type single reduction
wheel reduction type wheel reduction
Wheel
tire size  16/70-20
front wheel pressure 0.22Mpa
rear wheel pressure  0.20Mpa
service braking  air over hydraulic disc on 4 wheels
parking brake manual parking brake
Refill Capacity
fuel tank  80L
transmission 25L
 front axle 9KG
 rear axle 9KG
hydraulic tank  140L

leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Supplier
categories

Get Daily Update We’ll never share your email address with a third-party.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.